Iron Custom Three Lobe Roots Blower 10-80kpa Discharge Differential Pressure
About BC Three Lobes Roots Blower
BC series roots blower, with the intergral structure of impeller and shaft, has a waide application in environmental protection, electric power, architecture, gas supply and etc.
Main Chrarcteristics:
1) Working smoothly as helical timing gears is adopted.
2) It is flexible mounting ways because of the same structure in inlet and outlet.
3) It adopts more reasonable bearing structure, which can incresase the bearing operation life.
4) It is low noise, vibration and energy consumption.
Specifications:
| Model | BC6015 |
| Air capacity | 14.23-37.95m3/Min |
| Discharge differential pressure | 10-80KPA |
| Rotary speed | 850rpm-1800rpm |
| Motor type | 5.5KW-45KW
380/400/415/440V, 3PHASES, 50/60HZ |
| Motor brand | Standard: Siemens Beide or Wannan motor
Siemens and ABB motor for your option |
| Installation type | Standard: horizontal type.
Vertical type available for your option |
| N.W. of blower without motor | 415kg |
| Packing size Approx. | 1.80*1.20*2.00m (length*width*height) |
| Features | 1. Helical type timing gears for smooth operation
2. Compact, flexibility in installation gives users more choices.
3. Integral structure of impeller and shaft avoiding shortcomings of the split structure blower
4. Adopt imported oil seals made from fluoric rubber with better wear resistance and high-temperature resistance.
5. Low noise, low vibration and energy consumption.
|
Parameter
| Port Dia | Speed | Inlet airflow(m3/min)and shaft power(KW)at different conditions |
| 10kpa | 20kpa | 30kpa | 40kpa | 50kpa |
| rpm | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW |
| 150(6'') | 850 | 16.66 | 4.61 | 15.65 | 8.08 | 14.89 | 11.00 | 14.23 | 13.94 | | |
| 1000 | 20.02 | 5.43 | 19.01 | 9.50 | 18.25 | 12.94 | 17.60 | 16.40 | 17.04 | 20.39 |
| 1150 | 23.38 | 6.24 | 22.37 | 10.93 | 21.61 | 14.88 | 20.96 | 18.86 | 20.40 | 23.45 |
| 1250 | 25.62 | 6.78 | 24.61 | 11.88 | 23.85 | 16.18 | 23.20 | 20.50 | 22.64 | 25.49 |
| 1400 | 28.99 | 7.60 | 27.98 | 13.30 | 27.21 | 18.12 | 26.56 | 22.96 | 26.00 | 28.55 |
| 1500 | 31.23 | 8.14 | 30.22 | 14.25 | 29.46 | 19.41 | 28.81 | 24.60 | 28.25 | 30.59 |
| 1650 | 34.59 | 8.96 | 33.58 | 15.68 | 32.82 | 21.35 | 32.17 | 27.05 | 31.61 | 33.65 |
| 1800 | 37.95 | 9.77 | 36.94 | 17.01 | 36.18 | 23.29 | 35.53 | 29.51 | 34.97 | 36.71 |
Features:
1. Helical type timing gears for smooth operation
2. Compact, flexibility in installation gives users more choices.
3. Integral structure of impeller superior to split structure, more stable in power transmission
4. Adopt imported oil seals made from fluoro rubber, which is of great wear resistance and high-temperature resistance.
5. Small vibration and economical energy consumption.
Working Principle
Roots blower is a cubage blower, and it discharges a fixed amount of air in proportion to its rotation speed. Every rotation, there is two lobes to finish three times absorbing and dischargeing air. Compared with two lobes blower, it is of less air pulses, smaller load change, higher strength, lower noise and vibration.
Two paraller shafts have three lobes each, all the lobes keep small clearance with each other and housing inside. Every lobes rotatiomn, a certain air will be absorbed at inlet and transfeered form the housing inside surface to blower's diacharge port.
Two shafts will be turned by the timing gears, no any touching between lobes, so it can be turned at high speed without any lubrication inside. It has the following chaaracteristics: simply configuration; running smoothly;good performance stabilization. It has been widely applied in various industries.
Structure of blower main body
| No. | Part Name | Qty. | | No. | Part Name | Qty. | | No. | Part Name | Qty. |
| 1 | Footing | 2 | | 9 | Left end cover | 1 | | 17 | Oil tank | 1 |
| 2 | Hexagon bolt | 4 | | 10 | Round pin | 4 | | 18 | Gear | 2 |
| 3 | Antidust seal | 1 | | 11 | Casing | 1 | | 19 | Key | 2 |
| 4 | Drive impeller | 1 | | 12 | Oil seal | 4 | | 20 | Axial sleeve | 2 |
| 5 | Bearing | 2 | | 13 | Right end cover | 1 | | 21 | Bearing | 2 |
| 6 | Driven impeller | 2 | | 14 | Bolt | 16 | | 22 | Bearing plate | 2 |
| 7 | Dust cup | 1 | | 15 | Breather | 1 | | 23 | Adjustable pad | several |
| 8 | Grease nipple | 2 | | 16 | Bolt | 8 | | 24 | Magnetic nut | 1 |
Assembling drawing of blower package
Standard supply of scope
1. bare shaft blower
2. pressure relieve valve
3. wafer check valve (slim type)
4. inlet silencer(with air filter)
5. outlet silencer
6. public base (with belt cover)
7. rubber flexible joint and shock pad
8. motor pulley
9. pressure meter
10. V-belt
11. bolts and nuts and other connection parts
12. electric motor
Product Tags:
|
|
Iron Custom Three Lobe Roots Blower 10-80kpa Discharge Differential Pressure Images
|
