About BKW9020
BKW9020 Roots Blower inherits most components from BK9020, it adopts water cooling in bearing cover, which can reduce the temperature of bearing when working and prolong the longevity, it's bore size is DN250, which can generate larger capacity suitable for cement factory and power plant use.
Specifications:
| Model |
BKW9020 |
| Air capacity |
25.89m3/Min-73.32m3/Min |
| Discharge differential pressure |
60-100KPA |
| Rotary speed |
700rpm-1500rpm |
| Motor type |
37KW-280KW
380/400/415/440V, 3PHASES, 50/60HZ |
| Motor brand |
Standard: Siemens Beide or Wannan motor
Siemens and ABB motor for your option |
| Installation type |
Standard: horizontal type.
Vertical type available for your option |
| N.W. of blower without motor |
1310 kg |
| Packing size Approx. |
2.62*1.78*2.60m (length*width*height) |
| Features |
1. Helical type timing gears for smooth operation
2. Compact, flexibility in installation gives users more choices.
3. Integral structure of impeller and shaft for more stable and smooth operation
4. Adopt imported oil seals made from fluoric rubber with great wear resistance and high-temperature resistance.
5. Low noise, low vibration and energy consumption.
|
Parameters
| Type |
Port Dia |
Speed |
Inlet airflow(m3/min)and shaft power(KW)at different conditions |
Cooling Water |
| 60kpa |
70kpa |
80kpa |
90kpa |
100kpa |
| rpm |
m3/min |
KW |
m3/min |
KW |
m3/min |
KW |
m3/min |
KW |
m3/min |
KW |
L/min |
| BKW9020 |
250(10'') |
700 |
26.99 |
42.76 |
25.89 |
49.62 |
|
|
|
|
|
|
20 |
| 850 |
35.68 |
51.93 |
34.58 |
60.26 |
|
|
|
|
|
|
| 1000 |
44.36 |
61.09 |
43.26 |
70.89 |
42.28 |
80.68 |
41.35 |
90.48 |
40.42 |
100.28 |
| 1150 |
53.05 |
70.26 |
51.95 |
81.52 |
50.97 |
92.79 |
50.04 |
104.05 |
49.11 |
115.32 |
| 1250 |
58.84 |
76.37 |
57.74 |
88.61 |
56.76 |
100.86 |
55.83 |
113.10 |
54.90 |
125.35 |
| 1400 |
67.53 |
85.53 |
66.43 |
99.24 |
65.44 |
112.96 |
64.52 |
126.67 |
63.59 |
140.39 |
| 1500 |
73.32 |
91.64 |
72.22 |
106.33 |
71.24 |
121.03 |
70.31 |
135.72 |
69.38 |
150.42 |
Description of blower parts:
| Casing |
Made of Casting iron HT200
ENDLESS structure adopted for improving efficiency, one-time machined by CNC center with high precision
|
| Rotor (Shaft and impeller) |
Made of Casting iron QT500
The impeller and shaft is cast as an integral part.
Adopting NC planer for machining to achieve high precision |
| Gear end bearing |
Made of GCr15
NSK brand, double-row angular contact ball bearing, capable of supporting axial load |
| Drive end bearing |
Made of GCr15
NSK brand, cylindrical roller bearing |
| Gear |
Made of 20CrMnTi
Bevel structure for more smoothly running |
| Oil seal |
Made of fluoro rubber
bears high temperature and has a longer life. |
Working Principle
Roots blower is a cubage blower, and it discharges a fixed amount of air in proportion to its rotation speed. Every rotation, there is two lobes to finish three times absorbing and dischargeing air. Compared with two lobes blower, it is of less air pulses, smaller load change, higher strength, lower noise and vibration.
Two paraller shafts have three lobes each, all the lobes keep small clearance with each other and housing inside. Every lobes rotatiomn, a certain air will be absorbed at inlet and transfeered form the housing inside surface to blower's diacharge port.
Two shafts will be turned by the timing gears, no any touching between lobes, so it can be turned at high speed without any lubrication inside. It has the following chaaracteristics: simply configuration; running smoothly;good performance stabilization. It has been widely applied in various industries.
Cooling Water:
Clean water without foreign materials is required.
Water temperature shall be less than 40 ℃.
Product Tags:
|
|
DN250 BKW9020 Water Cooled Three Lobe Roots Blower Images
|
